Kinivo BTC455 Bluetooth Hands-Free Car Kit for Cars with Aux Input Jack - Manual (Page 8)

Kinivo BTC455 Bluetooth Car Kit with Multipoint
8
Kinivo BTC455 to pair the car kit.
For all other devices
Please follow your devices’ instructions on how to perform Bluetooth pairing.
a. If asked for a PIN or Passcode, enter “0000” (four zeros).
b. After the initial setup is complete, the BTC455 will automatically reconnect
to your device when it is powered on and your device is in range.
4. Bluetooth Pairing to Second Device (Multipoint)
The Kinivo BTC455 supports Bluetooth Multipoint and can be connected with
two devices at the same time. Once you have successfully paired your first
Bluetooth device with the BTC455, follow the steps below to pair a second
device.
1. Enter pairing mode on the BTC455 by pressing and holding the
multifunction button for 8 seconds. The LED will begin to alternately flash
red and blue.
2. Activate Bluetooth on the second device, then search for and pair to the
BTC455.
3. Power cycle the BTC455 (unplug and replug the cigarette lighter plug) - it
should now connect to both devices.