Kinivo BTC8 Bluetooth FM Transmitter - Manual (Page 11)

P 9/16
be found & displayed when you press & hold the MFB
button for 3 seconds.
e) Pairing BTC8 with Bluetooth devices
i. How to enter pairing mode
Function Status of BTC8 Operation
LED
indicator
Blue LED of the
button
flashes slowly after
turning on for 5
seconds
Press and hold
button for
about 2
seconds
Standby mode and
not connected to a
Bluetooth device Press and hold
button for
about 2
seconds
Enter
pairing
mode
Not connected to a
Bluetooth device Enter pairing
mode
automatically
Red and
blue LEDs
flashes
alternately
ii. Pairing with a Bluetooth cell phone
To enable pairing with a Bluetooth cell phone – you have
to have a cell phone that is Bluetooth-enabled. Specific
pairing steps may vary with different cell phones. Please
refer to your cell phone’s user manual for further
information. General pairing steps are as follows:
(1) Keep BTC8 and your Bluetooth cell phone within 1
meter when pairing;
(2) Enter BTC8’s pairing mode (red and blue LEDs flash
alternately);
(3) Switch on the cell phone’s Bluetooth function and
search for Bluetooth devices. After the search is
completed, select “BTC8” from the Bluetooth device
list;
(4) According to the indication, enter password or PIN
No:”0000”, and press ”Yes” or “confirm”;