Operation, 3 system requirements, 1 windows installation (xp, vista, 7) – Kinivo WID320 300 Mbps USB Wireless Network Adapter EN User Manual
Page 4
WID320 Wireless N USB Adapter
User Manual
p.4
Please contact
if you need assistance or if you have any questions.
You may also visit
o
1.3 System Requirements
Minimum computer requirements:
● CD Drive (for driver installation). Alternatively the drivers and the manual can be
Downloaded from
● 733MHz CPU or faster
● 64MB Memory or higher
● Operating System
○ Windows XP or higher
○ Linux 2.6 or newer
○ Mac OS X 10.4 or newer
2. Operation
To use the WID320 Wireless-N USB Adapter, simply plug the device into an available USB slot
on the computer or laptop.
If the drivers have not been loaded previously, continue by installing the drivers for your
respective operating system (see the following sections).
Note: Under normal operation, the WID320 LED indicator will turn on when plugged in. When
the adapter is in use, the LED indicator will blink.
2.1 Windows Installation (XP, Vista, 7)
Note: You will be required to restart your computer after installing.
1. Insert the Kinivo Software CD and run the setup when prompted. Alternatively, you can
download the drivers from