Kinivo 301BN Premium 3 port HDMI switch EN - Manual (Page 7)

Kinivo 301BN HDMI Switch
7
4. Plug the +DC 5V output plug of the power adapter into the DC IN jack of the HDMI Switch (Shown under
‘Side Panel Connector’ on Page 2). Plug the power adapter into an AC power outlet. Your HDMI switch is
now connected and ready for use.
Note: The remote control uses infrared light signal and requires direct line-of-sight to the IR Remote Sensor.
Please make sure that the IR Remote Sensor is not blocked.
LED Indication
RED LED indicates “Signal Not Selected”
BLUE LED indicates “Active Signal Path”
No LED indicates “No Input Signal”
HDMI In
Output Input 1 Input 2 Input 3
DVD Player
Game Console
HDTV
HDMI Cables
HDMI Cable
Cable Box or DVR