Kinivo WID380 300 Mbps Enhanced USB Wireless Network Adapter - Manual (Page 4)

WID380 300 Mbps Wireless Enhanced USB Adapter 4
If the drivers have not been loaded previously, continue by installing the drivers for your respective operating system
(see the following sections).
Note: Under normal operation, the WID380 LED indicator will turn on when plugged in. When the adapter is in use, the
LED indicator will blink.
1. Windows Installation (XP, Vista, 7)
Note: You will be required to restart your computer after installing.
1. Insert the Kinivo Software CD and run the setup when prompted. Alternatively, you can download the drivers from
support.kinivo.com.
2. Click Install to start the installation process.