Media Technology Systems STAGE 8.8 - Manual (Page 17)

Page 17 of 22 Oct‐12
simple local network with a single Ethernet switch, then 1.33mS can be
safely used. If more than 1 switch, then use 2.67mS. If more than 3
switches, then use 5.33mS.
o The “Location” is a useful way of uniquely naming the STAGE8.8 interface.
Up to 60 characters, eg “Ballroom 3: Stage left, Mics 7/8”. For more
detailed naming information in a large project, both the “Location” and
“Contact” fields can be used.
Figure 4-4: Global Interface settings
4.4 Presets
The STAGE 8.8 is a simple device and does not contain a host processor and no access to
multiple preset functionality. However, the Cobranet flash can be used to save Cobranet
interface settings via “persistence” (see previous section and Figure 4-4). If the
persistence option is enabled, then the last set of values/settings can be stored into the
Cobranet flash and will be restored on power up. Note that these settings can take up to