Chatsworth Products Analog KVM - Manual (Page 28)

28
Set up – IP Console
The IP Console on KVM Switches are pre-configured with an IP address and password to allow
quick setup and configuration. DHCP is not enabled. You can access the switch using a web
browser.
IP address 1: 192.168.1.22 (Single IP Console)
IP address 2: 192.168.1.23 (Second IP Console)
Subnet mask: 255.255.255.0
Gateway
None
Login super (lower case)
Password pass (lower case)
Before deploying the KVM Switch onto your network, change the IP address and default
password to match your network requirements using the following steps:
1. Download the KVM IP Console Setup Software
http://www.chatsworth.com/uploadedFiles/Files/37202_KVM_SWITCH_USER_MANUAL.pdf
from the CPI website:
http://www.chatsworth.com/Support-and-Downloads/Downloads/Software/
2. Export the file KVMIPsetup.exe from the zip file. The zip also contains user manuals.
3. Connect your computer and the IP KVM Switch to the same network switch
4. Double click KVMIPsetup.exe. The following screen will appear.