Campbell Scientific CM106K Tripod - Manual (Page 28)

CM106K Tripod
7.4 CM225 and 18098 Pyranometer Mounting Stand
The CM225 is used to attach a pyranometer or quantum sensor to a horizontal
pipe (1.0 to 2.1” OD) or vertical pole (1.0 to 2.1” OD).
The LI200X pyranometer and LI190SB quantum sensor mount to the CM225
via the LI200S leveling base (see Figure 7-4). The CS300 pyranometer mounts
to the CM225 via the 18356 leveling base. The CMP3 and LP02 pyranometers
include their own bubble level and leveling screws allowing them to mount
directly to the CM225.
The 18098 provides a larger surface for mounting a user-supplied Eppley
pyranometer.
CM225
LI200X Pyranometer
LI2003S
CM225
FIGURE 7-4. CM225 Pyranometer Mounting Stand
22