Campbell Scientific PONDVIEW Real-Time Monitoring & Control Software - Manual (Page 8)

PondView Introduction
2
If remote PCs are being used to network with the main server computer, then
PondView is the only installation that is required. Installation of LoggerNet is
only required on the server PC.
When prompted to restart the computer select Yes. If insertion of the CD does
not initiate the installation process, proceed as follows: From the Windows
system menu, select Start | Run.
Type D:\Setup.exe in the Open field or use the Browse button to access the
CD-ROM drive and select the setup executable in the folder.
This activates the PondView Installation Utility. Follow the prompts on the
screen to complete the installation.
The file Campbellsci will be loaded into the C:\Program Files directory. All
of the LoggerNet and PondView files will be found in the Campbellsci file.
Each PondView software package also includes a customized Application File.
This program is found on the 3 ½ floppy disk.
To install this file, insert the floppy disk into your A: drive. Using Windows
Explorer select the A: drive. Click the right mouse button and select Copy on
PondView.ini. Paste this file to the C:/Program File/Campbellsci/PondView
folder. This file already exists in the PondView folder so you will be asked if
you would like to replace it. Select yes. This will load the proper files to
operate your individualized program.
If a remote PC is used to network with the server running LoggerNet, the
network path needs to be specified as part of the PondView path.
Right click on PondView, found in START | PROGRAMS. A menu will
appear. Select Properties.