Pro-Lite PL-VFD - Manual (Page 5)

4
Comport Settings – When the program starts running, it will detect all the
available comports on the computer. Please locate the comport that is connected
to The InfoCenter.
(If you are not sure which comport is connected to The InfoCenter, create a
simple page, and submit it to The InfoCenter. If you receive an error message, it
is either you have selected the wrong comport or cable connection error)
Options – This is where you can adjust how you want to transfer the program
scripts/files to The InfoCenter. By default, it should be set as “Send though RS-
232 Port.”
MODEM
If you have a modem installed on your computer, and would like to use it
to transfer the programs to The InfoCenter, here is where you set up your
modem’s configuration.
If you have a direction connection from the computer to The InfoCenter
(via the Comport), you do not need to use the modem.
Modem Info: