Pro-Lite Gas Pricers - Manual (Page 7)

SETTING CONFIGURATION (continued)
5) Press ENTER → Sign ID Configuration appears → Each line ID
represents a price of each product line (To set price on each product
line, please refer to section 2, PRICE configuration).
6) Use up (↑) or down (↓) key to align the price of each product line.
7) Once determine the grade of each product line press ENTER → PCU ID
appears for each sign and which side they are on, side A or side B →
Correspond each sign with its ID, use arrow key to move the cursor to
make change of the PCU ID (The screen will show Sign number and
side A or B to help you program particular PCU)
a) to disable a product line, move the cursor to that product
line and press 0 (numeric zero)
b) to enable a product line, move the cursor to that product
line and press 1 (numeric one)
8)
Once all configurations are done, user has option to either test or
refresh the system.
II. System Test
1)
Press SETTING.
2) With default admin password (000000), the screen will prompt directly
to SETTING MENU without asking to enter password.
3)
Use down arrow key (↓) to scroll down to System (Sign) Test
4) Press ENTER
5) Use left (Å) or right (Æ) arrow key to move the cursor up (↑) or down
(↓) key to switch between sign and side A/B to perform test or refresh
PCU’s.
6)
Press ENTER
NOTE: Antenna on remote should be pointing vertical (i.e. towards the sky) for
optimum reception.
III. Price Setting History
1) Press SETTING.
2) With default admin password (000000), the screen will prompt directly to
SETTING MENU without asking to enter password.
3) Use down arrow key (↓) to scroll down to Price History
4) Press ENTER
5) Use up (↑) or down (↓) arrow key to scroll to the particular product to check its
price history
6) Press ENTER
7) Right (→) arrow key to move page up and left (←) arrow key to move page
down
8) Press ESC to cancel and return to previous screen: Price Setting History.
Page 5