Wesley BC-6200-8SA - Manual (Page 24)

Owner’s Manual and Service Guide – BCG Series 24
MAINTENANCE INSTRUCTIONS
Replacing Front Tires/Wheels: To remove and repair the
front tires and/or wheels, complete the following steps:
1) Remove the axle nut retaining clip.
2) Lift the front of the vehicle as explained in the
“Lifting the Vehicle” Section.
3) Loosen the axle nuts and remove the entire wheel,
hub and axle assembly from front fork.
4) Remove the lug nuts and remove the wheel from
the axle assembly.
5) Reinstall the repaired or replacement tire by
reversing the above sequence. Tighten to 70 to 80
ft. lbs. (95 to 108 Nm) torque.
Replacing Rear Tires/Wheels: To remove and repair the
rear tires and/or wheels, complete the following steps:
1) Loosen the lug nuts on the wheel.
2) Lift the rear of the vehicle as explained in the
“Lifting the Vehicle” Section.
3) Remove the lug nuts and remove the wheel from
the transaxle.
4) Reinstall the repaired or replacement tire by
reversing the above sequence. Tighten to 70 to 80
ft. lbs. (95 to 108 Nm) torque.
COMPONENTS - ELECTRICAL