Maximum Overview - Manual

MASTS AND BRACKETS
30 Samuel Barnet Blvd.
New Bedford, MA 02745
(508) 995-2200
NOW AVAILABLE FROM MAXIMUM
4 INCH WALL MOUNT
8 INCH WALL MOUNT
4”
The 4 inch wall bracket mounting assembly will
handle obstructions of up to 4 inches that may
be in the way of the sensor mast (such as roof
overhang).
”
8
The 8 inch wall bracket mounting assembly will
handle obstructions of up to 8 inches that may
be in the way of the sensor mast (such as roof
overhang).
18”
18 INCH WALL MOUNT
The 18 inch wall bracket mounting assembly will
handle obstructions of up to 18 inches that may
be in the way of the sensor mast (such as roof
overhang). Includes third leg on bottom bracket
for added support.
The hardware includes 18 feet of stainless steel
strap to handle most any size chimney. The
brackets will provide clearance for an overhanging
chimney cap, or other obstruction up to 4”.
CHIMNEY MOUNT
ADJUSTABLE EAVE MOUNT
” 4
Lower bracket adjusts from 45” to 60” to
accommodate most any roof pitch.
Masts are available in Type 304, mill finish
stainless steel or triple coated galvanized steel.
Masts will arrive as two 58” long, 1.25” O.D.
sections that join together to make a single
9’ 4” mast. These masts are ideally suited
for use with all Maximum, Inc. wind instruments.
SWAGED END
58”
MAST SECTIONS
BRACKET
HALF
BRACKET
HALF
MAST
SECTIONS