Assigning channels names, Fine tuning channel reception – Samsung LE40N71B User Manual
Page 13
English-11
Use fine tuning to manually adjust a particular channel for optimal reception.
1.
Use the number buttons to directly select the channel that
you want to fine tune.
2.
Press the MENU button to display the menu.
Press
the
or
button to select “Channel”, then press the
ENTER button.
3.
Press the
or
button to select “Fine Tune”, then press the
ENTER button.
4.
Press the
or
button to adjust the fine tuning.
Press the
ENTER button.
5.
Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk “
*
” on the right-hand
side of the channel number in the channel banner. And the channel number turns red.
To reset the fine-tuning, select “Reset” by pressing the
or
button and then press the
ENTER button.
Fine Tuning Channel Reception
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1.
Press the MENU button to display the menu. Press the
or
button
to select “Channel”, then press the
ENTER button.
2.
Press the
or
button to select “Name”, then press the
ENTER button.
3.
If necessary, select the channel to be assigned to a new name by
pressing
the
or
button. Press the ENTER button.
The selection bar is displayed around the name box.
4.
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat
steps
3 to 4 for each channel to be assigned to a new name.
6. Press the EXIT button to exit.
Assigning Channels Names
To...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
Then...
Press the
or
button
Press the
button
Press the
button
Press the ENTER button
BN68-01047N-00Eng.indd 11
BN68-01047N-00Eng.indd 11
2006-08-23
3:17:28
2006-08-23
3:17:28