Changing the colour tone, Changing the picture size – Samsung LE23R71W User Manual
Page 12
English-10
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 9.
2.
Press the
or
button to select “Reset”, then press the
ENTER button.
3.
Press the EXIT button to exit.
The “Reset” will be set for each picture mode.
Resetting the Picture Settings to the Factory Defaults
In PC, Component and HDMI Mode, only “16:9” and “4:3” mode can be adjusted.
(The “Zoom” mode is not supported.)
Select by pressing the
or
button.
Use the
or
button to move the picture up and down.
After selecting , use the
or
button to magnify or reduce the picture size in
the vertical direction.
Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.
16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
4:3: This is the default setting for a video movie or normal broadcasting.
You can select the picture size which best corresponds to your
viewing requirements.
1.
Press the MENU button to display the menu. Press the
or
button to
select “Picture”, then press the ENTER button.
2.
Press the
or
button to select “Size”, then press the
ENTER button.
3.
Select the required option by pressing the
or
button.
Press the ENTER button.
4.
Press the EXIT button to exit.
Changing the Picture Size
You can select the most comfortable colour tone to your eyes.
1.
To select the desired picture effect, follow the
“Changing the Picture Standard” instructions number 1 to 3 on page 9.
2.
Press the
or
button to select “Colour Tone”, then press the
ENTER button.
3.
Press the
or
button to select the desired colour tone setting.
Press the ENTER button.
4.
Press the EXIT button to exit.
Changing the Colour Tone
Cool2: Makes the colour temperature
bluer than “Cool1” menu.
Cool1: Makes whites bluish.
Normal: Keeps whites white.
Warm1: Makes whites reddish.
Warm2: Makes the colour temperature
redder than “Warm1” menu.
The adjusted values are stored according to the selected Picture mode.
You can select these options
by simply pressing the
P.SIZE
button on the remote control.
BN68-01074J-00Eng.qxd 8/19/06 6:58 AM Page 10