Samsung LE46C570J1S - Manual (Page 26)

26
English
Advanced Features
Connecting Wireless Network ¦
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN Adapter (WIS09ABGN), which
you connect to your TV’s back or side panel USB jack. See the illustration below.
The LAN Port on
the Wall
LAN Cable
Wireless IP sharer
Samsung Wireless
LAN Adapter
TV Side Panel
or
TV Rear Panel
Samsung’s Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.com. Samsung’s
Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung recommends using IEEE 802.11N. When you
play video over a IEEE 802.11B/G connection, the video may not play smoothly.
NOTE
✎
You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network. x
Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select retailers, x
Ecommerce sites and Samsungparts.com.
To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports DHCP, your TV can
x
use a DHCP or static IP address to connect to the wireless network.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is currently
x
being used by another device nearby, this will result in interference and communication failure.
If you apply a security system other than the systems listed blow, it will not work with the TV.
x
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIPAES (WPS2Mixed) x
for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or PIN
x
(Personal Identification Number). WPS will automatically configure the SSID and WPA key in either mode.
Keep the Samsung Wireless LAN Adaptor at a distance from the TV. If you watch the TV with the adaptor connected nearby, images
x
may appear corrupted for some channels.
If your router, modem, or device is not, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”
x
Connection Methods
x
: You can setup the wireless network connection on six ways.
PBC (WPS) –
Auto Setup (Using the Auto Network Search function) –
Manual Setup –
Ad-Hoc –
All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not supported.
x
To use the SWL(Samsung Wireless Link) function, connect to the
✎
USB 1 (HDD) port.
Notice
The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter.
In such case, establish a connection using one of the following methods:
Method 1
Connect using the USB right angle adapter
Method 2
Connect via an extension cable
ali
BN68-02791AEGH_00Eng.indb 26 3/9/2010 1:06:20 PM