Basic features, Fav.ch p.mode dual mts – Samsung LE32C350D1W User Manual

Page 16

Advertising
background image

16

English

Basic Features

Size

: Your cable box/satellite receiver

may have its own set of screen
sizes as well. However, we highly
recommend you use 16:9 mode most
of the time.
Auto Wide: Automatically adjusts the
picture size to the 16:9 aspect ratio.
16:9 : Adjusts the picture size to 16:9 for DVDs or wide
broadcasting.
Wide Zoom: Magnifies the picture size more than 4:3.

Adjusts the Position by using

▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit
the screen size.

Adjusts the Position or Size by using

▲, ▼ button.

4:3 : The default setting for a movie or normal
broadcasting.

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre
of the screen may cause image retention(screen
burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off
when HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) signals are inputted.

NOTE

After selecting

x

Screen Fit in HDMI (1080i/1080p) or

Component (1080i/1080p) mode, you may need to
centre the picture:
1. Press the

◄ or ► button to select Position.

2. Press the

ENTER

E button.

3. Press the

▲, ▼, ◄ or ► button to move the

picture.

Depending on the input source, the picture size

x

options may vary.
The available items may differ depending on the

x

selected mode.
In PC mode, only

x

16:9 and 4:3 modes can be

adjusted.
Settings can be adjusted and stored for each

x

external device connected to an input of the TV.
If you use the

x

Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and
right as in the overscan function.

Screen Mode (16:9 / Wide Zoom / Zoom / 4:3)

:

Available only when picture size is set to Auto Wide.
You can determine the desired picture size at the 4:3
WSS (Wide Screen Service) size or the original size.
Each European country requires different picture size.

Not available in PC, Component or HDMI mode.

Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation): When the broadcast signal is
weak, some static and ghosting may appear. Select one
of the options until the best picture is displayed.
Auto Visualisation: When changing analogue channels,
displays signal strength.

Only available for analogue channels.

When bar is green, you are receiving the best

possible signal.

MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide an improved
picture quality.

Disabled under PC mode.

HDMI Black Level (Normal / Low)

: Selects the black

level on the screen to adjust the screen depth.

Available only in HDMI mode (RGB signals).

Film Mode (Off / Auto1 / Auto2)

: Sets the TV to

automatically sense and process film signals from all
sources and adjust the picture for optimum quality.

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

Auto Protection Time (2 hours/4 hours/8 hours/10

hours/ Off) : If the same image remains on the screen,
Auto Screen Burn Protector will work.

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

P

POWER

MEDIA.P

FAV.CH

P.MODE

DUAL

MTS

BN68-02589C_Eng.indb 16

2010-3-18 18:55:50

Advertising