American Telecom ATS 4121CCL - Manual (Page 22)

22
4) Enter Handset name (characters are entered in the same way as for the Phone Book).
NAME
DAD'S PHONE
5) Press PROG to confirm the setting and to return to idle mode.
DAD'S PHONE
Language
The language used in the Handset display can be selected by following this sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key nine times.
>LANGUAGE
CLEAR MSG WAIT
3) Press PROG to enter the language selection sub-menu. The current language is shown in the second line.
Use ▲ or ▼ to –OR- press 0, 1 or 2 to select English, Spanish or French, respectively.
LANGUAGE
ENGLISH
4) Press PROG to confirm the setting. The phone returns to the previous menu.
>LANGUAGE
CLEAR MSG WAIT
The default language is English.
Message Waiting
Working in conjunction with ATS voicemail, the Handset and Base Unit provide visual prompts to alert you
to new messages. Once you have reviewed all new messages, the prompts are turned off until a new message
is received. You can also remove the ‘MESSAGE WAITING’ alert from the Handset display manually,
following this sequence:
1) Press PROG.
>CALL LOG
PHONE BOOK
2) Press the ▼ key ten times.
>CLEAR MSG WAIT
CALL LOG
3) Press PROG to enter the message sub-menu.
CLEAR MSG WAIT
CONFIRM?
4) Confirm clearing of the Message Waiting indication by pressing PROG (= yes), or cancel clearing by
pressing CANCEL (= no). After this the phone returns to the previous menu.
>CLEAR MSG WAIT
CALL LOG
Base Unit Status Indication
●The Base Unit is equipped with a CHARGE indicator (a red LED), which is turned on by putting the
Handset in the charge cradle.
●The second Base Unit indicator serves multiple purposes – specifically, Message Waiting and Line Status.
This LED is sometimes red and sometimes green, depending on what it is indicating:
SITUATION
WITHOUT MESSAGES ‘WAITING’ WITH MESSAGES ‘WAITING’
Phone line
Very slowly flashing Green Very slowly flashing Green
Disconnected