Advent LCD4WM - Manual (Page 5)

5
LCD Monitor Installation
1. Choose a suitable place for the screen in clear view of the driver
(recommended positions include next to the Rear Vision Mirror or in
the corner of the front window).
2. Examine the vehicle to determine the best way to run the power wires
to: accessory power, the reverse lights and to the camera at the rear of
the vehicle.
3. Mount the ‘tombstone’ metal lug onto the front Windscreen with
Permatex adhesive – follow the Permatex instructions on
application/drying.
4. Run the wiring harness from the LCD location to the rear of the
vehicle.
5. Attach reverse & accessory power wires.
6. Connect your reversing camera.
Note: When using a Advent Camera with your Advent Monitor the signal
and power for the camera will be supplied through the monitor extension
cable. Please also note that the microphone in the camera will be played
on the speaker built into the LCD monitor.
7. Connect the LCD Monitor to the harness.
8. Power up and adjust on screen settings.
NOTE: To adjust monitor settings lightly touch along the bottom of the
screen to enact the inductive screen menu and follow prompts.