Actron OBD II POCKETSCAN CP9125 - Manual (Page 8)

NOTE: If diagnostic trouble codes (DTCs) are already being
displayed from a previous read operation, press and hold
READ/Scroll Down key for 3 seconds and release.
6.Observe a Moving
*
on Display.
NOTE: If a “No Link” message
displays, cycle ignition key to
the OFF position for 10
seconds, then back ON and repeat “Reading Diagnostic
Data.”
7. View Codes on Display
NOTE: If there are no codes present,
the tool will display “0
Codes” and proceed to
display MIL Status when
READ/Scroll Down is
pressed.
•
To View Codes press and
release
READ/Scroll
Down key.
• If the code is a Pending
Code a , will be displayed.
*
No Link
P0443
P0452 ,
0 Codes9
3 Codes9
9
:
9
:
8