Asus DELUXE P4R800-V - Manual (Page 51)

ASUS P4R800-V Deluxe motherboard user guide 2-29
15. System panel connector (20-pin PANEL)
This connector accommodates several system front panel functions.
P4R800-V DELUXE
®
P4R800-V DELUXE
System Panel Connector * Requires an ATX power supply.
PLED-
PWR
+5V Speaker
Speaker
Connector
Power LED
Ground
Reset SW
Ground
Reset
Ground Ground
ATX Power
Switch*
PLED+
IDE_LED- IDE_LED+
IDE_LED
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED
lights up when you turn on the system power, and blinks when the
system is in sleep mode.
• Speaker Connector (4-pin SPEAKER)
This 4-pin connector connects to the case-mounted speaker and
allows you to hear system beeps and warnings.
• Hard Disk Activity Lead (2-pin IDE_LED)
This 2-pin connector is for the HDD LED cable. The read or write
activities of the device connected to the any of IDE connectors cause
the IDE LED to light up.
• ATX Power Switch / Soft-Off Switch Lead (2-pin PWRSW)
This connector connects a switch that controls the system power.
Pressing the power switch turns the system between ON and SLEEP,
or ON and SOFT OFF, depending on the BIOS or OS settings.
Pressing the power switch while in the ON mode for more than 4
seconds turns the system OFF.
• Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for
rebooting the system without turning off the system power.