Samsung RFG23DERS - Manual (Page 22)

22_ Operating
Whenever all ice is used at one time, the
above step 3 and 4 must be repeated
(before dispense the fi rst 4 to 6 ice cubes, it
needs waiting 8 hours).
This will replenish the ice cubes and ensure
maximum ice production.
When you dump the ice from the ice bucket, you
should press the dispenser lever once with ‘ICE
CUBED’ or ‘CRUSHED’ function ON to get new
ice faster after replacing the ice bucket in the
refrigerator.
Using the water dispenser
Place a glass underneath the water outlet and
push gently against the water dispenser lever with
your glass. Make sure the glass is in line with the
dispenser to prevent the water from splashing out.
If you have just installed the refrigerator or installed
a new water fi lter,Flush 3 L through fi lter before
use (fl ush approximately 6 minutes). Make sure
that water fl ows clearly again before drinking.
When you do not use the water dispenser
for 2~3 days (especially during the summer),
the dispensed water may have a funny smell or
taste. If this occurs, we recommend that you
discard the fi rst 1~2 glasses for better tasting
water.
Using the ice off function
When selecting
the Ice Off mode,
remove all ice cubes
from the bucket. If
you are not using
the ice dispenser,
the ice cubes may clump together. Pull the lock
lever forward to throw away ice cubes or remove
clumped ice from the bucket. Push the bucket
back until you hear a click.
If you have a long vacation or business trip,
close the water valve and shut off the water
supply to the Refrigerator. This will help prevent
accidental leakages. Do not disassemble the
Ice-maker personally. It may cause disorder. Do
not wash or spray the ice bucket with water. Just
wipe it with a dry cloth. In order to operate the
ice-maker properly, water pressure of 138~862
kPa is required.
Water clouding phenomenon
All water provided to refrigerators fl ows through
the core fi lter which is an alkaline water fi lter. In
this process, the pressure in the water that has
fl owed out of the fi lter gets increased, and oxygen
and nitrogen become saturated. When this water
fl ows out in the air, the pressure plummets and
the oxygen and nitrogen get supersaturated so
that they turn into gas bubbles. The water could
look misty due to these oxygen bubbles.The
water may look temporarily cloudy due to these
oxygen bubbles. After a few seconds, the water
will look clear.
Please wait 1 second before removing the cup
after dispensing water to prevent spills. Do not
pull out the lever dispenser after taking out ice or
water. It comes back automatically. Ice is made
in cubes.
When you select “Crushed”, the ice-maker grinds
the ice cubes into crushed ice.
Check the water level
2
Test button
Pull on Push
DA99-03403B-10.indb 22 DA99-03403B-10.indb 22 2014. 7. 18. 8:02 2014. 7. 18. 8:02