ALK Technologies CoPilot Live 11 - Manual (Page 10)

Setting Up a Bluetooth GPS Receiver
1 Switch on your Bluetooth GPS receiver.
2 Select Bluetooth in the Setup GPS Receiver
screen then click Next.
CoPilot Live will begin searching for Bluetooth devices
in your immediate vicinity. Once the search is
complete, all nearby GPS devices will be displayed.
3 Select your GPS receiver from the list. (If you are
using the GPS receiver supplied with your CoPilot
software it will appear in the list with a name
similar to “BTGPS”.)
4 Click Next. To complete the setup, click Finish.
You are now ready for your fi rst trip with CoPilot!
Getting started
10
01
Tips: GPS Signal
• The fi rst time you use the GPS receiver it may take a
moment to determine your position.
• GPS signal will be limited inside buildings, tunnels or parking lots. To
work effectively the GPS receiver needs to have a clear line of sight to
the sky.
• If you are using a USB receiver, be sure it is fi rmly plugged into your
laptop and that your computer recognizes the device.
User Guide 01 Getting started
Note: If you chose Manual to set up your
Bluetooth receiver, you may be prompted to
enter a pin code. Use “0183” or “0000” to
enter.