Alliance Laundry Systems T433I - Manual (Page 11)

Safety Information
9 M414038 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
21. Install this tumbler according to this Installation
Manual. All connections for electrical power,
grounding and gas supply must comply with
local codes and be made by licensed personnel
when required.
22. Remove laundry immediately after tumbler
stops.
23. Always read and follow manufacturer’s
instructions on packages of laundry and cleaning
aids. Heed all warnings or precautions. To reduce
the risk of poisoning or chemical burns, keep
them out of reach of children at all times
(preferably in a locked cabinet).
24. Do not tumble fiberglass curtains and draperies
unless the label says it can be done. If they are
dried, wipe out the cylinder with a damp cloth to
remove particles of fiberglass.
25. Always follow the fabric care instructions
supplied by the garment manufacturer.
26. Never operate the tumbler with any guards and/or
panels removed.
27. DO NOT operate the tumbler with missing or
broken parts.
28. DO NOT bypass any safety devices.
29. Failure to install, maintain, and/or operate this
machine according to the manufacturer’s
instructions may result in conditions which can
produce bodily injury and/or property damage.
30. Solvent vapors from dry-cleaning machines
create acids when drawn through the heater of the
unit. These acids are corrosive to the tumbler as
well as to the laundry load being dried. Be sure
make-up air is free of solvent vapors.
To reduce the risk of serious injury, install
lockable door(s) to prevent public access
to rear of tumblers.
W055
WARNING