Q-sd electrical safety precautions, Line voltage selection – American Audio Q-SD User Manual

Page 3

Advertising
background image

©

American Audio

®

- www.americanaudio.us - Q-SD Instruction Manual Page 3

NOTE: This product satisfies FCC
regulations when shielded cables
and connectors are used to con-
nect the unit to other equipment.
To prevent electromagnetic inter-
ference with electrical appliances
such as radios and televisions, use
shielded cables and connectors
for connections.

WARNINg: TO PREVENT FIRE OR ELECTRIC
SHOCk HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN, LIQUIDS, OR MOISTURE

CAUTION: TO PREVENT ELECTRIC SHOCk
DO NOT USE THIS (POLARIZED) PLUg WITH
AN EXTENSION CORD, RECEPTACLE, OR
OTHER TYPE OF ELECTRICAL OUTLET
UNLESS THE WIDE BLADES CAN BE
CAREFULLY INSERTED INTO A MATCHINg
WIDE SLOT.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE
FICHE POLARISEE AVEC UN PROLON-
gATEUR, UNE PRISE DE COURANT OU
UNE AUTRE SORTIE DE COURANT, SAUF
SI LES LAMES PEUVENT ETRE INSEREES A
FOND SANS EN LAISSER AUCUNE PARTIE A
DECOUVERT.

Q-SD

ELECTRICAL SAfETY PRECAUTIONS

VOLTAgE SELECTOR SWITCH

LINE VOLTAgE SELECTION

For Dual Voltage models only!
• The desired voltage may be set with the
VOLTAgE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAgE SELECTOR
switch as this may cause damage
• If the VOLTAgE SELECTOR switch does
not move smoothly, please contact a quali-
fied service technician.

The serial and model number for this unit is
located on the rear panel. Please write down
the numbers here and retain for future refer-
ence.

Model No._____________________________

Serial No._____________________________

Purchase Notes:
Date of Purchase_______________________

Dealer Name__________________________

Dealer Address_________________________

_____________________________________
_____________________________________

Dealer Phone__________________________

Advertising