Accton Technology Media Converter EC3802-WDM - Manual (Page 23)

Product Specifications
23
Product Specifications
Standards Conformance IEEE 802.3-2005 Ethernet, Fast Ethernet,
Full-duplex flow control
Fiber Specifications
Fiber Cable ITU-T G.985 single-fiber single-mode (WDM)
Connector SC and splice (internal)
Wavelengths 1310 nm transmit, 1550 nm receive
Data Rate 100 Mbps full duplex
Transmit Power -14 to -8 dBm
Receive Power -28 to -7 dBm
Optical Power Budget 16 dB
Range Up to 15 km (9.32 miles)
Ports 1 RJ-45 10/100BASE-TX
Media Connection 10BASE-T: Cat 3, 4, or 5 UTP cable
100BASE-TX: Cat 5 UTP cable
LEDs PWR, OPT (Fiber), TEST (Loopback), PoE (Power
over Ethernet), LINK (LAN status/activity), 100 (LAN
speed), FULL (LAN duplex mode)
Dimensions 18 x 11 x 3.5 cm (7.09 x 4.33 x 1.38 in.)
Weight
Media Converter 250 g (8.82 oz.) maximum
AC Adapter 120 g (4.23 oz.) maximum
Input Power DC 12V, 1.0A (via AC power adapter)
Available Adapters: United Kingdom - MU12-2120100-B2(UK)
Europe - MU12-2120100-C5(EU)
USA - MU12-2120100-A1(US)
Power Consumption 4 Watts maximum
Power-over-Ethernet Input voltage: 36-52 volts, 90 mA, 4 watts
Note: Power can be provided to the CPE through the
LAN port based on IEEE 802.3af PoE specifications.
When both PoE is provided and the adapter is plugged
in, PoE power is used.
Environmental
Temperature Operating: 0~40 °C / 32~122 °F
Storage: -40~70 °C / -40~158 °F
Humidity 5~95% (non-condensing)
Certification
Immunity IEC 61000-4-2/3/4/5/6/8/11
Emissions FCC Class B
EN55022 (CISPR 22) Class B
EN 61000-3-2/3
Safety IEC 60950-1 & EN 60950-1
UL 60950-1 & CSA 60950-1