Avanti PAC12000 - Manual (Page 10)

10
OPERATING YOUR AIR CONDITIONER
AUTO Display
When this sequence is selected, after pressing the MODE button, the corresponding signal indicator
is lit. In this mode, your unit will logically choose a desired room temperature. If the temperature is
not comfortable for you, the desired MODE can be selected manually.
COOL Display
When this sequence is selected after pressing the MODE button, the corresponding signal indicator is
lit. You should set the desired room temperature and speed of the fan manually.
TEMPERATURE Display
Shows the selected temperature.
FAN Display
When this sequence is selected, after pressing the MODE button, the signal indicator is lit. Then
select a speed for the fan manually. Under this mode you cannot select the TEMPERATURE.
DEHUMIDIFIER Display
When this sequence is selected after pressing the mode button, the corresponding signal indicator is
lit.
Under this mode, you cannot select a fan speed or adjust the temperature since the fan motor
operates at a pre-set fan speed.