AMX Audio-Only Module MAX-AOM - Manual (Page 11)

MAX-AOM Audio-Only (USB) Module
7 MAX AOM and AVM Modules
The Short Rack-Mounting Bracket (FIG. 4) uses three screws to attach to the AOM #2 enclosure, and
two screws to secure the left side of the MAX-AOM-EX assembly to the equipment rack.
1. Remove the Faceplate (FIG. 5).
2. Remove and discard the long rack-mount bracket (FIG. 6).
FIG. 3 Side Mounting Bracket
FIG. 4 Short Rack-Mount Bracket
FIG. 5 Removing the Faceplate
FIG. 6 Removing the long rack-mount bracket
Tabs fit into slots on the
side panel of the AOM #2
Tabs fit into slots on the
side panel of AOM #1
Two screws secure the bracket to front and back of AOM #2
Use screws to secure the Side Mounting Bracket to AOM #1
Use screws to secure the Side Mounting Bracket to AOM #1
Side Mounting Bracket
Short Rack-Mount Bracket
Two screws secure the Short Rack-
Mount Bracket to the equipment rack
Three screws secure the
Short Rack-Mount Bracket
to the side of AOM #2
(front)
Faceplate
AOM #1
(front)
AOM #1
Long rack-mount bracket