AMX Audio-Only Module MAX-AOM - Manual (Page 9)

MAX-AOM Audio-Only (USB) Module
5 MAX AOM and AVM Modules
If you are adding only one AOM module to the server, then you’ll specify up to four server
output/zones (one for each of the four possible audio outputs on the AOM). If you are adding
two AOMs (MMS-04S, -12S and -900 servers only), you’ll specify up to eight outputs (four
per AOM), as indicated in the following table.
4. In the Enter USB port number field, enter the number of the USB port on the MMS server that this
AOM will be connected to (range = 1 - 2). If you are using a MMS-01S, -02S or -02SB server, this
number should always be set to 1 (since these servers have only one USB port). Click OK to
proceed.
5. In the Enter AOM output number field, specify which of the four available audio outputs on the
AOM you are adding (range = 1 - 4) to the MMS server output number specified in step 1.
6. The system will notify you that the module has been added to the system. Click OK to return to the
Output Module Setup menu.
Once the module has been added, select View from the Output Module Setup menu. The module you just
added should appear in the list of Installed Output Modules. AOM modules are listed by MMS output /
zone number assignment, USB port number and AOM output number.
Select View from the Admin menu to view a list of all output modules (AOMs and AVMs)
already in the system.
Select Remove to remove an existing output module from the system.
Connecting the MAX-AOM to the MMS Server
Once the AOM has been added to the server, you can connect it to the MMS server and audio system(s):
1. Connect the AOM(s) to an audio system (amplifier, switcher, etc.) using one of two options:
a. Use stereo RCA cables for analog audio output.
b. Use a coaxial cable for digital audio output.
2. Connect the included power supply to the rear panel power connector on the AOM to apply power
to the module.
3. Use the supplied 6’ USB cable to connect a USB port on the rear panel of the MMS server to the
USB port on the rear panel of the MAX-AOM module.
MMS Output Zones, USB Port and AOM Audio Outputs
MMS Output/Zone (1-33) USB port connection (1-2) AOM Audio output (1-4)
1 AOM 1 (on USB 1) AOM 1 - Audio Output 1
2 AOM 1 (on USB 1) AOM 1 - Audio Output 2
3 AOM 1 (on USB 1) AOM 1 - Audio Output 3
4 AOM 1 (on USB 1) AOM 1 - Audio Output 4
5 AOM 2 (on USB 2) AOM 2 - Audio Output 1
6 AOM 2 (on USB 2) AOM 2 - Audio Output 2
7 AOM 2 (on USB 2) AOM 2 - Audio Output 3
8 AOM 2 (on USB 2) AOM 2 - Audio Output 4
9 AVM 1
10 AVM 2
11...(to 33) AVM 3...