Disassembling the lcd module – Acer 5210 User Manual
Page 77
Advertising
68
Chapter 3
Removing the VGA Heatsink
1.
Release the two screws securing the VGA heatsink.
2.
Then detach the VGA heatsink.
Disassembling the LCD Module
1.
Remove the four screw cushions on the LCD bezel then release the four screws holding the
LCD bezel.
2.
Carefully detach the LCD bezel from the LCD module.
3.
Tear off the tapes holding the LVDS cable and the LCD cable then release the two screws
securing the inverter board.
Advertising