Alvin Rotatrim M24T - Manual (Page 2)

Heavy-duty cutting
head with three
pressure rollers
ROTATRIM Technical Series
For cutting extra-thick, extra-dense materials, these
industrial strength trimmers are equally at home cutting
thin films and tissue paper.
• Self-sharpening tungsten steel cutting wheel
• Cast metal cutting head and end supports
• Chromed steel guide bar, 1½" square
• Aluminum clamping bar with automatic release
• Three pressure rollers and rugged gripper
for secure clamping
• Aluminum baseboard, 11" wide
• Cuts in both directions (an overload plate can be
removed for bi-directional cutting of thin materials)
• Factory set side rule
• Pull handle mounts to top of cutting head
• Baseboard extension rods for supporting large
materials are supplied with models 1550 and above.
These removable rods slide into the baseboard to
extend the total depth to 28"
• Floor stand and other accessories available
• Shipped in wooden crate, except T650 and T950
Model
Cut
Length Dimensions
Nunber of
Ext. Rods
Shipping
Weight
Net
Weight SRP
T650 26" 40"l x 14"w 26 lbs. 21 lbs. $995.00 ea
T950 38" 52"l x 14"w 33 lbs. 26 lbs. 1,245.00 ea
▲ T1250 49" 64"l x 14"w 73 lbs. 30 lbs. 1,495.00 ea
▲ T1550 61" 76"l x 14"w 4 88 lbs. 35 lbs. 1,795.00 ea
▲ T1850 73" 88"l x 14"w 4 106 lbs. 40 lbs. 2,095.00 ea
▲ T2500 99" 114"l x 14"w 6 136 lbs. 51 lbs. 2,995.00 ea
▲ Oversize item shipped by truck.
ROTATRIM Power Technical Series
Electrically-powered, heavy-duty machines that
combine the best features of the Technical Series
with a belt-driven cutting head for heavy and
continuous workloads.
• Same features and specs as Technical Series
• Cutting head is driven by a heavy-duty
electric motor controlled by a foot-operated
pneumatic switch. Leaves both hands free for
positioning material
• Cutting speed 20 in./sec. (28 lbs./inch torque).
High-speed version also available that cuts at
39 in./sec. (16 lbs./inch torque)
• Modular circuit design is user friendly
• Baseboard extension rods for supporting large
materials are supplied with models 1550 and above.
These removable rods slide into the baseboard to
extend the total depth to 28"
• Floor stand and other accessories available
• All sizes shipped in wooden crate
Model
Cut
Length Dimensions
Nunber of
Ext. Rods
Shipping
Weight
Net
Weight SRP
▲ PT650 26" 55"l x 16"w 114 lbs. 54 lbs. $3,800.00 ea
▲ PT950 38" 67"l x 16"w 128 lbs. 59 lbs. 4,100.00 ea
▲ PT1250 49" 79"l x 16"w 143 lbs. 64 lbs. 4,200.00 ea
▲ PT1550 61" 91"l x 16"w 4 158 lbs. 73 lbs. 4,500.00 ea
▲ PT1850 73" 102"l x 16"w 4 176 lbs. 79 lbs. 4,600.00 ea
▲ PT2150 85" 1114"l x 16"w 5 194 lbs. 84 lbs. 4,800.00 ea
▲ PT2500 99 128"l x 16"w 6 202 lbs. 90 lbs. 6,900.00 ea
▲ Oversize item shipped by truck.
ROTATRIM APPLICATION & CUTTING GUIDE
MATERIAL
HEAVY DUTY
TECH. &
POWER
TECH.
MEDIUM
DUTY
PROF.
M SERIES
MEDIUM
DUTY
FLYER
DIGITECH
LIGHT DUTY
MONORAIL
Aluminum ● ●
Cardboard ● ●
Drafting Film ● ● ● ●
Illustration Board ● ●
Laminating Film ● ● ●
Leather ● ●
Mat Board ● ●
Newsprint ● ● ● ●
Paper ● ● ● ●
Photo Film ● ● ● ●
Polyester Film ● ● ● ●
Shim Steel ●
Tissue ● ● ● ●
Tracing Paper ● ● ● ●
Vellum ● ● ● ●
Vinyl ● ●
Vyco ●
!
RotaTrim Trimmers do not cut foam board products.
“Scratch and Dent” trimmers are often available. Please inquire.
THICKNESS REFERENCE FOR LAMINATED OUTPUT
Light Duty Combined thickness up to .014"
Medium Duty .015" up to .030"
Heavy Duty .030" and above
Actual results may vary depending on material density and hardness. Please
use these figures for reference only.
ROTATRIM PRODUCT WARRANTY
All RotaTrim trimmers are warranted against faulty workmanship and materials for a
period of five years, depending on the model. This warranty does not cover cutting
blades, clamp strips, or other plastic and rubber parts that are subject to normal wear
and tear. Damages due to improper use, handling, or storage will void this guarantee.
Please save the original shipping carton.
NOTE: Please allow eight weeks for delivery for PT series only.
©2006 ALVIN & COMPANY, INC. • P.O. Box 188, Windsor, CT 06095-0722
Phone: 860-243-8991 • Toll-Free: 800-444-2584 • Fax: 860-242-8037 • Toll-Free Fax: 800-777-2896
Visit us at www.alvinco.com
LIT-A6322 9/06