Atech Tech LIBRA-04 M - Manual (Page 5)

LIBRA-04 M MANUAL COPY ROUTER
5 / 19
This explains not be pulled up the protective parts
.
Do not operate without guards.
This is high temperature symbol.
II.2 – SAFETY INSTRUCTIONS
Before operating this equipment, read the safety instructions and carry out them.
This technical handbook should be accessible at all times at the site of
operation of the machine.
The operators who work during the installation, should read the machine guide.
Be sure of understanding.
User should not intervene to the machine if occurs any failure. Only expert should
repair the machine.
Machine and parts should be protected from the all external defects. Check for
proper oil level before operating machine. If it is insufficient, add up.
Do not stay under machine during loading and discharge.
Never use the machine without grounding. Machine grounding should be made
for two different coupling.
1-) Normal machine grounding.
2-) PLC grounding.
While machine is run or set up for angular cuts, be careful about pinching your
hand to clamping pistons.
When transmission parts of machine abrade, they should be replaced with new
ones.