Alloy Computer Products POE100 Series - Manual (Page 3)

3. Checklist
Before you start installing the POE converter, please verify that the package
contains the following items.
- The POE100 Series
- AC Power Cord
- CD containing this manual
Please notify your sales representative if any of the above items are missing
or damaged.
4. Installing the Converter
4.1 POE100 converter with a Powered Device (PD)
1. Connect the POE100 converter to an AC power source.
2. Connect the copper cable to your IEEE 802.3af compliant PD device.
e.g. Wireless Access Point, IP Phone, IP Camera
Note:
The POE100 can also work as a standard media converter and
connect to a non POE device.
3. Connect the fibre cable to your connecting device.
Default: Auto
Auto or Force setting, see figure 10. S1-Bit 1
TP
Port
Attach Cat. 5 cable to the copper port and ensure the cable run is not
over 100m in distance.
The Copper port supports Auto MDI-X, therefore there is no need to
use a cross-over cable when connecting to a switch.
Fibre
Port
Default: 100FDX
”100FDX”/”100HXD” setting, see figure 10. S1-Bit 5