ASA Electronics 856 - Manual (Page 6)

REMOTE CONTROL OPERATION
-6-
BATTERY INSTALLATION
Before attempting to operate your Remote Control,
install the batteries as described below.
1) Turn the remote control face down. Press down
on the ridged area of the battery cover, and slide
it off.
2) Install two “AAA” batteries as shown. Make sure
that proper polarity (+ or -) is observed.
3) Slide the cover back until it clicks into position.
The remote control will operate the LCM0802TV,
Flexvision Televisions and Video Cassette Players.
It is not a universal remote control and will not
control equipment from other manufacturers.
If a universal remote control is used with the
LCM0802TV, choose the remote control encoding
scheme for Action Televisions when programming
the remote.
1
2
3
4
5
6
8
9
10
11
12
14
13
16
15