Connecting the fm antenna, Wireless network – Samsung HT-C6500-XAA User Manual

Page 27

Advertising
background image

English

27

02

Connections

Wireless Network

You can connect to network with a Wireless IP sharer. A wireless AP/IP router is required to make a
wireless network connection. Set the network options. (See page 38)

NOTE

You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable operation of the
wireless network.)
Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance, distance, obstacles,
interference by other radio devices, etc).
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
When applying the security key for the AP (wireless IP sharer), only the following is supported.

Authentication Mode : WEP, WPAPSK, WPA2PSK
Encryption Type : WEP, AES

For the AllShare function, a PC must be connected in the network as shown in the fi gure.

Connecting the FM Antenna

Connect the FM antenna supplied to the
FM 75Ω COAXIAL Jack.

Slowly move the antenna wire around until
you fi nd a location where reception is good,
then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM
broadcasts.

1)
2)

1.

2.

iPod

FM ANT

WIRELESS

OPTICA

DIGIRA

AODIO I

FM Antenna (supplied)

Wireless IP sharer

Networking with PC for
AllShare function
(See pages 60~61)

PC

Broadband

service

HT-C6500_XAA_0817.indd 27

HT-C6500_XAA_0817.indd 27

2010-08-17 11:21:19

2010-08-17 11:21:19

Advertising