Information codes – Samsung DV42H5200GF-A3 User Manual

Page 34

Advertising
background image

English - 34

visible during Steam-

Care

Extended time

Verify correct loading (clothes)/cycle selection (see page 23).

PROBLEM

SOLUTION

Lint on clothes

Make sure the lint filter is cleaned before every load. With some loads that
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.

Some fabrics are lint producers (for example, a fuzzy white cotton towel)
and they should be dried separately from clothes that are lint trappers (for
example, a pair of lack linen pants)

Divide larger loads into smaller loads for drying.

Check pockets thoroughly before washing and drying clothes.

Garments still wrinkled

after Wrinkle-Care

Small loads of 1 to 4 items work best.

Load fewer garments.Load similar-type garments.

Odors remain in

clothing after Refresh.

Fabrics containing strong odors should be dried in a normal cycle.

Water drips from

nozzle when Steam-

Care starts

This is steam condensation. The dripping water will stop after a short time.

Sprayed water is not

Sprayed water is difficult to see when the door is closed.

Information codes

Information codes may be displayed to help you better understand what is occurring with your Dryer.

ERROR DISPLAY MEANING

SOLUTION

tE

The thermistor resistance is very low
or high.

Clean the screen or vent.
If the problem continues, call for service.

HE

Invalid heating Temp when the dryer
is running.

Call for service.

dE

The door is open.

Clean the door and then restart.
If the problem continues, call for service.

bE2

Invalid state of key.

Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continue, call for service.

FE

Invalid power source frequency.

Try restarting the cycle.
If the problem continues, call for service.

9E1

Electronic Control Problem
(Over Voltage Error.)

Call for service.

AE

Electronic Control Problem
(Communication Error.)

Call for service.

EEE

Invalid state of Eeprom
communication.

Call for service.

dF

Invalid door.

Call for service.

For any codes not listed above, call 1-800-SAMSUNG (726-7864)

DV425000_DC68-03381A.indd 34

2013-12-19 �� 1:07:16

Advertising