Installation of the water dispenser line – Samsung RS2555SW-XAC User Manual

Page 27

Advertising
background image

27

INSTALLATION OF THE WATER DISPENSER LINE

1) Connect to the 3/16” white plastic tube on the back of the

refrigerator.

2) Slip the compression nut onto the white plastic tube.

3) Screw the union into the white plastic tube and tighten the

compression nut.

SEPARATION

OF RED CAP

STICKER

(MONTH INDICATION)

COVER FILTER

ALIGN THE INDICATION MARK
WITH LOCK POSITION.

1) As shown, the fixed cap separate in the refrigerator by rotating it

counterclockwise.

Remove the water filter from the box and put a month indicator

sticker on the filter as shown.

2) Write the month you installed the filter on the label.

EX) If the water filter was installed in March, put “MAR”

3) Remove the protective cap then position and insert the

filter as ishown.

4) Slowly turn the water filter clockwise 90º to align

the indication mark on the cover, locking the filter in posi

tion. Do not overtighten.

Please check that the indication line aligns with the lock position.

Connect the water tube to the refrigerator.

Install the water filter.

Waterline must be connected to potable water only

NOTE

NOTE

Do not overtighten the compression nut.

NOTE

4) Silp the compression sleeve and compression nut on copper

tubing as shown. Tighten the comperssion nut onto the union.

5) Turn water on and check for any leakege.

Nut

Union

Sleeve
Nut

Advertising
This manual is related to the following products: