Samsung SPH-M350ZRXSPR - Manual (Page 77)

2D. Contacts 67
Co
nta
c
ts
Ⅲ Bluetooth —Use the Bluetooth capabilities of your
old phone to transfer all of your contacts to the
phone. See “2I. Bluetooth” on page 104.
Transfer Contacts with Bluetooth
The process of transferring data via Bluetooth is also
known as “beaming” and might be referred to that way
within other literature.
To set up your old phone and the Seek to transfer
contacts:
1. Turn on your old phone and then activate the
Samsung Seek.
2. Activate Bluetooth functionality on your old phone
and set visibility to
Always visible (page 105).
3. Activate Bluetooth on your new phone by pressing
and touch Main ( ) > Settings > Bluetooth .
4. Touch the Bluetooth button to toggle it to the On
state. (The page then refreshes to reveal new
functionality and options.)
5. Touch Visibility and set your Bluetooth visibility to
Always visible .
To pair the two phones and send contacts to your
Samsung Seek:
1. On your Samsung Seek phone, press and
touch Main ( ) > Settings > Bluetooth > Trusted
Devices. See “Pairing Bluetooth Devices” on
page 106.
2. Select the previous phone by touching its name.
3. Once connected and communicating, confirm the
PIN code on both phones match.
4. Slide the connection slider on the Seek to Accept .
Accept the connection and confirm the PIN on
your other device.
5. On your old phone, go to the Bluetooth function
that allows you to send all of your contacts to the
trusted device.
6. Select a contact and begin the transmit process.
7. On the Seek, move the acceptance slider to the
right and
Accept . Within a few seconds, your other
phone begins transmitting the new contact entry
and the Seek begins the storage process.
Main
Main
M350.book Page 67 Monday, October 11, 2010 9:58 AM