Samsung EC-NV7ZZBBA-US - Manual (Page 60)

Ś59ś
Setup menu
[ Start up sound ]
ƅ You can select the sound that is activated whenever the camera is turned on.
[ Sound Volume ]
ƅ You can select the sound volume levels of start sound, operation sound and
shutter sound.
ƀ [Sound Volume] sub menus : [Off], [Low],
[Medium], [High]
Off
Low
Medium
High
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȗ
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȗ
ƀ Start up sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
- If the start up image is set to [Off], the start up
sound will not activate, even though you may
have set these to on.
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound
Ȗ
[ Operation Sound ]
ƅ If you set sound to ON, various sounds will be activated for camera startup,
when buttons are pressed, so that you can be aware of the camera operation
status.
ƀ [Sound] sub menus : [Off], [Sound 1], [Sound 2],
[Sound 3]
Exit:BACK
Exit:BACK
Exit:BACK
Off
Sound 1
Sound 2
Sound 3
Start Image
Sound Volume
BEEP Sound
Start Sound
Shutter Sound Ȗ
[ Shutter sound ]
ƅ You can select the shutter sound.
ƀ Shutter sound : [Off], [Sound 1], [Sound 2],
[Sound 3]
[ Formatting a memory ]
ƅ This is used for formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
ƀ Sub menus
[No] : The memory will not be formatted.
[Yes] : A [Processing!] message appears and the
memory will be formatted. If you run FORMAT
in Play mode, a [No Image!] message will
appear.
Be sure to run [Format] on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has
been taken from another camera.
- Always format the memory card using this camera. If you insert a memory
card that has been formatted using other cameras, memory card readers, or
PCs, you will get a [Card Error!] message.
No
Yes
Format
Copy to Card
Video Out
USB
Reset
Ȗ
Exit:BACK
Exit:BACK