Samsung SPH-A880TSAQST User Manual
Page 160
152
Section 2J: Using the Built-in Camera and Camcorder
Setting Picture Mode
To set the picture mode:
1.
From camera mode, press Options (
).
2.
Select Settings (
).
3.
Highlight View Mode and press
.
4.
Press the navigation key up or down to highlight Wide
Screen or Full Screen and press
.
Setting the Flash
To activate the flash:
1.
From camera mode, press Options (
).
2.
Select Flash (
).
3.
Select one of the following options and press
.
Ⅲ
Off to deactivate the flash.
Ⅲ
On This Shot to activate the flash for one shot.
Ⅲ
Always On to activate the flash for all pictures.
Setting the Self-Timer
To activate the Self-Timer:
1.
From camera mode, press Options (
).
2.
Select Self-Timer (
).
3.
Press the navigation key up or down to select the
desired length of delay (Off, 5 Seconds, 10 Seconds) and
press .
4.
Select Capture (
) when you are ready to start
the timer.