Samsung LS19RTUSSZ-XAZ - Manual (Page 38)

Configuration from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
Note : This product can be used worldwide when area configuration is set up
regardless of broadcasting type.
Note : When country is not selected properly, the product may not locate
channels.
Language You can choose one of 2 language.
• English, БЯ±¹¾о
Note : The language chosen affects only the language of the OSD.
It has no effect on any software running on the computer.
Sleep Timer Use to set the Monitor to be turned off automatically the set in certain
minutes.
(Off, 30, 60, 90, 120, 150, 180)
Menu
Transparency Changes the opaqueness of the background of the OSD.
• High
• Medium
• Low
• Opaque
Blue Screen If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
• On / Off
Reset Picture parameters are replaced with the factory default values.
- Available in PC Mode Only
1) Image Reset
2) Colour Reset
Image Reset
Colour Reset