Samsung SGH-I927ZKAATT - Manual (Page 132)

127
Wi-Fi Status Indicators
The following icons show your Wi-Fi connection status at a
glance:
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point (WAP).
Displays when Wi-Fi is active but there is a
communication issue with the target Wireless Access
Point (WAP) or your device is not connected to a WAP.
Displays when connected to another device using
Wi-Fi Direct. For more information, refer to “Wi-Fi
Direct” on page 127.
Wi-Fi Advanced Settings
The Wi-Fi settings - Advanced menu allows you to set up many of
your device’s Wi-Fi service, including:
• Setting your Wi-Fi sleep policy
• Viewing your device’s MAC Address
• Configuring use of either a DHCP or Static IP
To access the Wi-Fi Advanced Settings menu:
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi settings.
2. Press ➔ Advanced.
For more information, refer to “Network Notification” on
page 92.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
Note: See your service plan for applicable charges for Wi-Fi Direct.
1. From the Home screen, tap ➔ Settings ➔ Wireless
and network ➔ Wi-Fi Direct settings.
2. On your phone, at the Search for devices prompt, tap OK.
Tap the Do not show again checkbox if you want to skip this
step in the future.
3. If you are currently connected to a Wi-Fi network, a prompt
will display Current network will be disconnected. Tap OK to
continue or Cancel to exit.
4. Tap Wi-Fi Direct. A check mark is displayed indicating that
Wi-Fi Direct is active.
The device scans for other Wi-Fi Direct devices.