Getting to know your camera – Samsung I80 User Manual

Page 4

Advertising
background image

ENGLISH



Getting to know your camera

Take care not to touch the lens or lens cover to avoid taking

an unclear image and possibly causing camera malfunction.

Do not fire the flash while it is in contact with hands or

objects. Do not touch the flash after using it continuously. It

may cause burns.

Leaking, overheating, or damaged battery could result in fire

or injury.

- Use battery with the correct specification for the camera.

- Do not short circuit, heat or dispose of battery in fire.

- Do not insert the battery with the polarities reversed.

Remove the battery when not planning to use the camera

for a long period of time.

Otherwise the battery may leak corrosive electrolyte and

permanently damage the camera’s components.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not

avoided, may result in a minor or moderate injury.

Before an important event or going on a trip, you should

check the camera condition. Samsung cannot be held

responsible for camera malfunctions.

Be sure to format the memory card if you are using a newly

purchased memory card for the first time, if it contains data

that the camera cannot recognise, or if it contains images

captured with a different camera.

Do not insert the memory card the wrong way round.

Credit cards may be demagnetized if left near a camera case.

Avoid leaving magnetic strip cards near the case.

Do not move the camera while it is switched on when you are

using the AC Charger. After use, always switch off the camera

before unplugging the cable from the wall socket. Then make

sure that any connector cords or cables to other devices are

disconnected before moving the camera.

Failure to do so may damage the cords or cables and cause

a fire or electric shock.

Before inserting any cables or AC adapter, check the direc-

tions and do not insert by force. It may cause breakage of

cable or camera.

Never the connect the 20 pin connector to a USB port of a

PC. Doing so is highly likely to cause a computer malfunction.

Advertising