Samsung TP17LS7LSO-XBM - Manual (Page 6)

English 4
Connecting Your Monitor & Speakers
Caution : Turn the power off to the monitor, computer and speakers before connecting or
disconnecting the speakers.
1 Signal cable
Connect the end of the signal cable to
your computer’s video port. If you are
using a Macintosh computer, connect
the cable to a Macintosh adapter, and
set the pins on your adapter (adapter
not included). A PC-compatible
computer does not need an adapter.
2 Stereo input cable
Connect this cable to your sound card
or computer
3 DC input cable
Connect this cable to DC output port
on the back of your monitor.
4
Left output cable
Connect this cable to L- input port on
the back of the left side speaker.
5 L-input port
Connect the left output cable from
right speaker here.
6 Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
7 DC output port
Connect DC input cable here.
8 Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
9 Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
10 Install the monitor driver
•
Ins ert the provided diskette into the
A drive.
• Double click the “install.exe” file.
Your New Monitor
750ST(E)TOC.book Page 4 Friday, January 28, 2000 4:00 PM