Auto Page AutoPage RF-501 - Manual (Page 7)

and disarms the alarm.
B. LED STATUS INDICATOR OPERATION
1. LED OFF= The RF-501 is disarmed or in the valet mode.
2. LED CONSTANT ON= Indicates open trigger circuit.
3. LED FAST FLASHING= Passive arming timer is counting down.
4. LED FLASHING= The RF-501 is armed.
5. LED FLASHING IN A 2 FLASH/HOLD SEQUENCE= Alarm
breach.
C. AUDIBLE AND VISUAL ALARM STATUS INDICATOR
1. 1 CHIRP WITH LIGHT FLASH= Alarm is armed.
2. 2 CHIRPS WITH LIGHT FLASH= Alarm is disarmed.
3. 4 CHIRPS WITH LIGHT FLASH & LED FLASHING IN A 2
F LASH/HOLD SEQUENCE= Alarm is disarmed and has been
breached in your absence.
D. VALET/OVERRIDE SWITCH
NOTE: Both VALET and OVERRIDE functions are performed from the
same switch.
1. OVERRIDE FUNCTION
The OVERRIDE FUNCTION may be used if the RF-501 transmitter
is lost, or broken. To operate the OVERRIDE FUNCTION, enter
the vehicle (siren will sound); switch the vehicle igniti on to ON.
Move the VALET/OVERRIDE switch to ON; then OFF, the siren
will stop. The RF-501 will be disarmed. Quickly service the
alarm or transmitter to insure continued vehicle protection.
2. VALET FUNCTION