Samsung SCH-R530RWBMTR - Manual (Page 125)

Connections 119
Configuring Bluetooth Settings
Configure your phone’s Bluetooth settings. For more
information, see “Bluetooth settings” on page 131.
Note: Bluetooth profiles are specifications for services
supported by individual devices. For a list of profiles your
phone supports, see “Bluetooth profiles” on page 130.
Turning Bluetooth On or Off
1. From the Home screen, sweep your finger from the top
of the screen downward to display Notifications.
2. Touch Bluetooth to turn Bluetooth On.
Touch Bluetooth to turn Bluetooth Off.
Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
After pairing, your phone and the target device will connect
with each other and exchange information without a
passcode or PIN.
Note: When connected, the Bluetooth connected icon
displays in the Status Bar. If you receive a new request
for connection while connected with a Bluetooth
headset, a new Bluetooth icon displays at the left of the
Status bar and Notifications displays the connection
request.
1. Activate the target device’s discoverable mode.
2. On your phone, turn on Bluetooth (see “Turning
Bluetooth On or Off” on page 119). A list of detected
devices pops-up on your display.
3. From the list of detected devices, touch the target
device. Your phone attempts to automatically pair with
the target device.
If automatic pairing fails, then follow the prompts to
complete manual pairing:
• Enter a PIN for the target device and touch OK.
Tip: Some devices use a default passcode of 0000. Refer to
the target device’s user manual for more information.