Samsung LTP326WX-XAC - Manual (Page 55)

54
5. Audio Chapter 6.
Anynet Q & A
Problem Solution
Solution1 : Check to see if the speakers are connected properly to the TV or the Receiver.
Solution2 : Check to see if the monitor output cable of the TV or the audio output cable of
the device is damaged.
Solution3 : See if the “Mute ”function has been activated.
Solution4 : If you are using a Receiver to listen,check to see if the Receiver is plugged in properly.
Solution5 : If you are using the Receiver to listen,check to see if the audio cables of the TV and the
device are connected properly according to theconnection diagram.
Audio cables must be connected according to the connection diagram to hear sound.
Solution6 : Check to see if the device and the Receiver are connected with an optical cable and
the Advanced Connection Setting has been selected.You won ’t get any sound if you
select the Advanced Connection Setting but do not use an optical cable to connect
the devices.
Solution7 : Check to see if the DVD player is in stop,slow playback,fast playback or fast reverse
playback mode.It is normal that you don ’t get sound when the device is in such a mode.
Solution8 : Check the DVD-only audio output settings.
Solution9 : In the “Play DVD ” mode,see if the disc is severely damaged.
Solution10 : If the device is connected to the TV with the S-Video signal cable,make sure that the
audio signal cable from the device connected with the S-Video cable is connected to the
Video Input 1 port on the TV.If the video/audio signal cable from another device is
connected to the Video Input 1 port,you will not hear sound from the device .
I get picture but no sound.
Solution1: Go to [ Set up ] in the Anynet menu and select “Listen Through TV.” I would like to hear the sound
through the TV speakers.
Solution1: Make sure the optical cable is connected properly. (See Page 20.) I get no sound from the
DVD Combo.
Solution1 : Go to [ Set up] in the Anynet menu and select “Listen Through Receiver.”
(If the connection setting is not selected, connect the Anynet Receiver and the 5.1 channel
speakers and select the connection setting before use. See the instruction manual provided
with the
Receiver to connect the 5.1 channel speakers.)
I would like to hear the
sound through the 5.1
channel speakers.
BN68-00653H-00Eng.qxd 7/8/04 3:44 AM Page 54