Samsung AV17KSBL - Manual (Page 4)

English - 2
Please make sure the following items are included with your monitor. If any items are
missing, contact your dealer.
Connecting Your Monitor
1 Turn off your computer and unplug
the power cord.
2 Signal cable
Connect the end of the signal cable to
your computer’s video port (Video
board, video card, or graphics card). If
you are using a Macintosh computer,
connect the cable to a Macintosh
adapter, and set the pins on your
adapter (Adapter not included).
A PC-compatible computer does not
need an adapter.
3 Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
4 Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
5 Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
6 Install monitor driver
•
Insert the provided diskette into the
A drive.
•
Double click the “install.exe” file.
Manual
Stand Monitor
Power Cord
Warranty card
(Not available in all locations)
Driver Installation Diskette
(Not available in all locations)
EXIT EXIT MENU MENU MENU
3
4
2
Your New Monitor
753DF.book Page 2 Thursday, February 3, 2000 10:43 AM