Samsung DV393GTPAWR-A1 - Manual (Page 24)

English - 24
operating Instructions, tips
Dry Level
Selection Button
To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles, press the
Dry Level button. An indicator light will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings. Larger or bulkier loads may
require the Very Dry or More Dry setting for complete dryness.
The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture
in the clothing at the end of the cycle. Damp Dry is designed to partially dry items. Use
for items that lay flat or hang to dry.
Temp Selection
Button
To select the correct temperature for the load, press the Temp button. An indicator light
will illuminate next to the desired temperature. Press the button repeatedly to scroll
through the settings.
High – For sturdy cottons or those labeled Tumble Dry.
Medium – For permanent press, synthetics, lightweight cottons, or items labeled
Tumble Dry Medium.
Medium Low – For lower heat than Medium to dry synthetic or washable knit fabrics.
Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
Extra Low – Provides the lowest heated dry temperature possible.
Time Selection
Button
When using Manual Dry cycles, you can adjust the drying time by pressing the Time
Selection button.
During the Sensory Dry cycle, the time light indicator is off because exact drying times
are determined by fluctuating humidity levels.
Signal Selection
Button
When the cycle is complete, a chime will sound.
If you selected the Wrinkle Prevent option, the chime will sound intermittently.
Adjust the volume of the chime or turn it off by pressing the Signal button.
Press the button repeatedly to scroll through the choices.
Start/Pause
selection button
Press to pause and restart programs.
Power button
Press once to turn your dryer on, press again to turn it off. If your dryer is left on for
more than 10 minutes without any buttons being touched, the power automatically
turns off.
CHILD LOCK
Prevents children from playing with your dryer.
Setting/Releasing
To turn on or turn off the Child Lock, press both the Time and Signal buttons simultaneously for
3 seconds.
Child Lock Details
- You can turn Child Lock on while your dryer is running.
- Once you set the Child Lock function, no button, except for the Power button, will respond
until you turn off the Child Lock function.
- The Child Lock indicator will be lit.
If the dryer is powered on again, the Child Lock function stays on.
To turn off Child Lock, follow the instructions above.
When other buttons, except for the Power button, do not respond, check the Child Lock
indicator. If Child Lock is on, follow the instructions above to turn Child Lock off.
5
4
6
7
8
9
DV405ETPAWR_03021F-09_EN.indd Sec13:24 DV405ETPAWR_03021F-09_EN.indd Sec13:24 2013-12-11 1:09:26 2013-12-11 1:09:26