Samsung WA456DRHDSU-AA - Manual (Page 30)

30_ maintaining your washer
maintaining your washer
PuRE CyCLE TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Select the Pure Cycle
Tm course.
• Once the Pure Cycle TM course is selected, the only
function that can be set is Delay Start.
3. Press the Start/Pause button.
• If you press the Start/Pause button, Pure Cycle
begins.
• Using Pure Cycle, you can clean the drum without using a cleansing agent.
• Never use Pure Cycle when laundry is in the washing machine. This may cause damage to
the laundry or a problem with the washing machine.
The Pure Cycle Auto Indicator function
• If the “Pure Cycle” is lit after a wash, it indicates that tub
(drum) cleaning is required. In this case, remove the laundry
from the washing machine, turn the power on, and clean
the drum by running Pure Cycle.
• If you do not run Pure Cycle, the “Pure Cycle TM ” indicator
turns off. However, the “Pure Cycle Tm ” indicator will light
again after two washes. Not running Pure Cycle at this
point will not cause a problem with the washing machine.
• Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
WA422*/WA400*
WA456*
CAuTIon
WA456*
WA422* / WA400*
HUDSON WASH_WA456_USER MANUAL_DC68-03133A-08_EN.indd 30 2014-3-1 14:10:21